| 28.06.2022 | K3D100三分量力傳感器 | M42拉扭復(fù)合傳感器應(yīng)用于船舶螺旋槳推力與扭矩測試 |
| 28.06.2022 | K3D100三分量力傳感器 | K3D400 |
| 28.06.2022 | K3D100三分量力傳感器 | K3D100 |
| 28.06.2023 | 推出新品3KD120 | K3D120 |
| 28.06.2022 | Pin assignment for the UP13-plug connector updated in K6D154 - K6D300 | UP13 Pin assignment |
| 2023.02.02 | K3D100三分量力傳感器 | 3KD100 |
| 28.06.2022 | Pin assignment for the UP13-plug connector updated in K6D154 - K6D300 | UP13 Pin assignment |
| 04.03.2022 | Technical data of the GSV-6A M12 updated, now with the 8-pin M12 connector | GSV-6A M12 |
| 27.02.2022 | Knowledge-Base and Support Form online | Knowledge-Base?and?Support-Form |
| 25.02.2022 | new version of GSVmulti: integrates functionality of DAQ2keyboard | GSVmulti 1.49 |
| 14.01.2022 | New measuring amplifier GSV-6A M12 in aluminium housing | GSV-6A M12 |
| 11.01.2022 | The new ring force sensor KR29 | KR29 |
| 16.12.2021 | the smallest 3-axis force sensor from 500mN - K3D35 | K3D35 |
| 01.11.2021 | 3d / STEP-model for the biggest 6-axis sensor K6D300 | STEP-file for K6D300 |
| 26.10.2021 | Mounting instructions for the K3A155 sensors available | mounting instructions |
| 02.08.2021 | Manual for the Ultraminiatur Data Logger GSV-6BT | gsv-6bt |
| 25.06.2021 | update manual sensors | ba-sensors-en.pdf |
| 01.06.2021 | new professional Version GSVmulti | GSVmulti Professional |
| 01.06.2021 | new version GSVmulti | GSVmulti V1.48 |
| 12.03.2021 | Data sheet KD80se revised: Accuracy class 0.5%, 10Hz Data frequency | Force Sensor KD80se |
| 18.02.2021 | New fore transducer in ultra miniature execution for tensile and compressive measurements | Ultra miniature force sensor KD18s |
| 18.02.2021 | New ring torion force transducer with high accuracy for tensile and compressive measurements | Force sensor KR55 |
| 16.02.2021 | Application report about strain measurements with an amplifier GSV-6BT | Stress-analysis-15 |
| 16.02.2021 | Application report about the strain gauge installation | Stress analysis 14 |
| 16.02.2021 | New ultraminiature force transducer for tension and compression measurement | double bending beam force sensor KD33 |
| 12.02.2021 | New crack sensor / dendrometer CS40 | Crack sensor CS40 |
| 03.02.2021 | new Version GSVmulti | GSVmulti V1.47 |
| 29.01.2021 | new manual for GSV-6BT | ba-gsv6bt-en.pdf |
| 06.01.2021 | The 6-axis force/torque sensor K6D154 is now available with the robust UP13 connector | K6D154 with UP13 |
| 06.01.2021 | Configuring Decimal Places? | Decimal Places |
| 06.01.2021 | Scaling Factor of measurement amplifiers | Scaling-Factor |
| 20.12.2020 | Photogallery ME-Building | ME-Building |
| 18.12.2021 | USB 2.0 converter 83785 | USB 2.0 |
| 13.12.2020 | Online Calculator for Sensors with strain gauges | Straingage-Calculator |
| 03.12.2020 | 1-channel DIN rail housing amplifier with PROFINET | ENOD4-T DIN Weighing transmitter |
| 05.11.2020 | Description of the lifetime of strain gauge sensors | Lifespan ME sensors |
| 03.11.2020 | New Charger IMAX B6AC V2 as replacement for charger Ultramat 14 plus | Charger IMAX B6AC V2 |
| 07.10.2020 | New compression force sensor: KM10a | KM10a overview |
| 07.10.2020 | New in electronic accessories: SD card micro, USB cable, travel adapter | Accessories in shop |
| 06.10.2020 | New in the straingauge-adhesive category: UHU epoxy adhesive with static mixer and dosing gun | UHU adhesive |
| 01.10.2020 | Smaller, but with more power: the new miniature measuring amplifier as pcb GSV-5 | GSV-5 overview |
| 28.09.2020 | Notes on mounting K6D sensors | k6d-mounting |
| 25.09.2020 | 'Basics on CAN bus' is now available in English | kb-canbus-en.pdf |
| 19.09.2020 | Fotogallery about the ME Building | ME-Building |
| 17.09.2020 | Key guard for the measuring amplifier GSV-8DS | GSV-8 Key guard |
| 17.09.2020 | Rack for up to 5x GSV-8DS, synchronization up to 40 channels | GSV-8 Rack |
| 16.09.2020 | Overview of all 6-axis force/torque sensors, comparison of the technical data, in German and English | K6D - Comparison table |
| 15.09.2020 | Measuring amplifier for ICP vibration sensors | ICP-Transmitter |
| 07.09.2020 | Various temperature tests for sensors ranging from - 40°C to + 180°C now available in shop | Temperature tests for sensors |
| 03.09.2020 | Overview of the suitable measuring amplifiers for straingage stress analysis | amplifiers for stress analysis |
| 02.09.2020 | Mounting instructions for three-axis sensors are now available in English | K3D-Mounting instructions |
| 01.09.2020 | update of the English version of ME-Glossary | ME-Glossary |
| 31.08.2020 | the new 1-axis piezoelectric accelerometers | PCB-accelerometers |
| 28.08.2020 | 16-channel measuring amplifier consisting of 2x GSV-8DS | Set of 2x GSV8DS |
| 27.08.2020 | Adapter board for GSV-6PI to connect the K6D sensor | Adapter board GSV-6PI |
| 26.08.2020 | Manual for screw-on strain sensors updated | ba-da-so-en.pdf |
| 26.08.2020 | Manual for high-resolution strain sensors updated | ba-da-hr-en.pdf |
| 08.07.2020 | Update of Ethercat Esi Files | GSV8_EtherCat_ESIfiles.zip |
| 08.07.2020 | Update der Anleitung für GSV-6 'Clickr_clackr' (german version only) | ba-clickr-clackr-pdf |
| 08.07.2020 | New Windows DLL for GSV-8 and GSV-6 measuring amplifiers | MEGSV86dll_v1_33.zip |
| 11.05.2020 | Strain-Gage-Starter-Kit updated | Starter-Kit-Basic |
| 08.05.2020 | Photo Gallery ME Building | ME-Building |
| 21.04.2020 | Profile of ME measurement systems | profile |
| 01.04.2020 | new 6-axis force/torque sensor F6D45 | F6D45 |
| 27.03.2020 | new load cell KM55 with inner thread M10 | KM55 M10 |
| 12.10.2020 | our new building | ME_Building |
| 07.10.2019 | new version of manual for Force/Torque Sensors | ba-k6d_en.pdf |
| 02.09.2019 | new load cell KM55 | KM55 |
| 15.08.2019 | Design Review of TS70 --> TS70a | TS70a |
| 15.08.2019 | Documentation of GSV-6DEV updated | GSV-6DEV |
| 08.08.2019 | GSV-6PI incl.?PCB with 2xSubD44HD connectors | GSV-6PI SubD44HD |
| 06.08.2019 | new housing for mounting GSV-6L | Housing GSV-6L |
| 06.08.2019 | new SMD-solder Sn60Pb38Cu2 ?0,23mm | Sn60Pb38Cu2-100g |
| 25.07.2019 | new force sensor K3A | K3A |
| 04.07.2019 | new force/torque sensor K6D300 | K6D300 |
| 02.07.2019 | new 3-axis acceleration sensor | A3S 4030 |
| 28.06.2019 | Update of manual GSV-6bt | ba-gsv6bt-en.pdf |
| 27.06.2019 | Connection cable with MP11 for 6-axis sensors in 5m, 10m and 20m length available | MP11- connection cable |
| 23.06.2019 | Cut-off Frequency, Data Frequency | Cut-off Frequency,?Data frequency |
| 21.06.2019 | screwable calotte for sensors series KDs | Calotte screwable |
| 11.06.2019 | Synchronization cable for two pieces GSV-8DS | GSV-8DS Sync-cable/2 |
| 06.06.2019 | 6-axis multi-component sensor K6D175 with new robust plug connector UP13 | K6D175?10kN/1kNm/UP13,?20kN/2kNm/UP13,?50kN/5kN/UP13 |
| 05.06.2019 | New variant for GSV-1H: connection ?of strain gage quarter bridges 350 ohms | GSV-1H 010/250/2/QB350 |
| 04.06.2019 | Update of the GSV-8 manual: voltage source is added | ba-gsv8_en.pdf |
| 29.05.2019 | Transportation box for 6-axis force/torque sensor K6D225 | transportation box K6D225 |
| 28.05.2019 | New robust connection cable for large 6-axis multi component sensors | Connection cable with UP13 plug |
| 27.04.2019 | New variants of KD80se 100N/010-5 and 200N/010-5 with output signal 0... 10 V | KD80se 100N/010-5,?KD80se 200N/010-5 |
| 27.04.2019 | New variants of KD80s 100N and 200N | KD80s 100N,?KD80s 200N |
| 20.04.2019 | Resolution of Force sensors | Resolution of force sensors |
| 21.03.2019 | New product: shield for GSV-6 PI as a 6-channel amplifier | GSV-6PI Shield |
| 01.03.2019 | Description of the configuration options for ME measuring amplifier | GSV::Configuration |
| 28.02.2019 | New load cell KM38 with the internal thread M4 for the compression force measurement | KM38 M4 |
| 22.02.2019 | Basic equipment for strain gauge application | Basic equipment strain gauges |
| 12.02.2019 | new Windows DLL for GSV-8 and GSV-6, C# Library | MEGSV86dll_v1_27.zip |
| 12.02.2019 | new multi-component K6D150-sensor | K6D150 |
| 04.02.2019 | DAkkS-calibration certificate for the calibrator ME145 | DAkkS - ME145 |
| 01.02.2019 | Update of Manual GSV-8 | ba-gsv8_en.pdf |
| 24.01.2019 | Calibrator ME145: datasheet updated; | ME145 |
| 21.01.2019 | EtherCat: Selection of the ESI file for device description | Select_ESIfile.pdf |
| 16.01.2019 | Basics about accuracy of multi-component sensors | K6D-Accuracy |
| 14.01.2019 | General instructions for the commissioning of sensors and measuring amplifiers were created | ba-sensors-en.pdf |
| 14.01.2019 | User-guide for GSVmulti was created | ba-gsvmulti-en.pdf |
| 27.12.2018 | Site-Search function added fo Content and Shop | Search |
| 19.12.2018 | Instructions for GSv-13i and GSV-13q | GSV-13i, GSV-13q |
| 18.12.2018 | New version of GSVmulti: 6x12 matrix, recording with data reduction mean, max, min | GSVmulti |
| 04.12.2018 | High Accuracy Calibration HA available for selected 3D sensors | HA-Calibration 3D |
| 04.12.2018 | High Accuracy Calibration HA available for selected 1D sensors | HA-Calibration -1D |
| 03.12.2018 | New miniature load cell with 5kN nominal force for compression force measurements | KM12 |
| 21.11.2018 | New load cell with integrated electronics KM40e for compression force measurements | KM40e |
| 21.11.2018 | New s-type force sensor with integrated electronics KD80se for tension and compression force measurements | KD80se |
| 20.11.2018 | Load cell KM40 with 100N and 200N for compression force measurements | KM40 |
| 20.11.2018 | DAkkS-Calibration of torque up to 600Nm | DAkkS Calibration Certificate 600Nm |
| 24.09.2018 | 2 new adapter to terminal block for GSV-8DS | Adapter SubD15HD & SubD44HD |
| 18.09.2018 | Update esi-file for EtherCat GSV-8 | GSV8esi_v20.zip |
| 18.09.2018 | Update GSVmulti: Version 1.41: Thermocouples, Bugfixes, ... | GSVmult-1-41,?changelog_en.txt |
| 03.09.2018 | New 3-axis force/torque sensor | K3R70 |
| 03.08.2018 | The biggest 6-Axis sensor: K6D225 | K6D225 |
| 16.07.2018 | ME:: Solutions in overview, english version | Solutions |
| 01.07.2018 | New product GSV-13q, rectangular design | GSV-13q |
| 29.06.2018 | Publication in IEN D-A-CH, May 2018,
TIMGlobal Media specialist publisher | 6-axis force-moment sensor (DE) |
| 24.06.2018 | New product GSV-13i, Ultraminiature measuring amplifier ?18mm | GSV-13i |
| 23.06.2018 | K6D::Info; Information about K6D sensors | K6D::Info |
| 01.06.2018 | New measuring amplifier: GSV-6LTE (old name), now GSV-6IoT | GSV-6IoT |
| 31.05.2018 | New K6D sensor K6D130 1kN/200Nm/MP11 | K6D130 1kN/200Nm/MP11 |
| 31.05.2018 | New K6D sensor K6D110 8kN/500Nm/MP11 | K6D110 8kN/500Nm/MP11 |
| 31.05.2018 | New K6D sensor K6D110 1kN/100Nm | K6D110 1kN/100Nm/MP11 |
| 31.05.2018 | New K6D sensor K6D80 500N/20Nm | K6D80 500N/20Nm/MP11 |
| 20.04.2018 | Publication of the technical article about the 6-axis force / torque sensors with the MP11 miniature connector | The smallest plug connector in the world (DE) |
| 31.03.2018 | Technology First: measuring amplifiers and filters | GSV::Filter |
| 25.02.2018 | Windows 10 UWP-App für GSV-6BT: GSV-6BT_TOOL_UWP | gsv6bt-tool-uwp |
| 25.02.2018 | Documentation for GSV-6BT | ba-gsv6bt.pdf,?ba-gsv6bt-datalogger.pdf,?ba-gsv6bt-incrementalencoder.pdf,?ba-gsv6bt-gattservices_en.pdf,?ba-gsv6bt-UWP-App_en.pdf |
| 22.02.2018 | New products in shop: GSV-6L needle adapter and GSV-6 blackbox | GSV-6L needle adapter
GSV-6 blackbox |
| 11.02.2018 | TEDS Fundamentals (Transducer Electronic Data Sheet) | GSV: TEDS |
| 11.02.2018 | Functions of the measuring amplifier | GSV: Functions |
| 11.02.2018 | Structure of the measuring amplifier | GSV: Structure |
| 23.01.2018 | Training: strain gauge application | Training: strain gauge application |
| 21.01.2018 | Electronics::Technolgy First | Electronics::Technology First |
| 29.11.2017 | Software DAQ2keyboard released for download | DAQ2keyboard-v1-0-0-19.zip |
| 15.11.2017 | manual ba-k6d_en.pdf with examples for usage of 'Matrix Plus' | ba-k6d_en.pdf |
| 29.09.2017 | World's smallest connector for force / moment sensors in the article by Hüthig publisher | all-electronics.de |
| 24.09.2017 | WiFi Interface for GSV-8 | GSV-8 WiFi |
| 03.09.2017 | Network Interface for GSV-8 | GSV-8 Network |
| 27.8.2017 | Accessories for GSV-8DS: TCP/IP interface | TCP/IP Interface |
| 20.08.2017 | Homepage, about-us, slogan, products,?jobs, slider 'programming' | Technology first |
| 18.08.2017 | Download Link für MATLAB example with GSV-8 | MATLAB |
| 16.08.2017 | Review of technical data strain Sensors DA26, DA40, DA54, DA68, DAdx | Strain Sensors |
| 16.07.2017 | Instructions 'Add Calibration matrix' in GSVmulti for K6D sensors | calibration-matrix |
| 04.06.2017 | Fotogallery of Measurement Trade Fair in Nuremberg | SensorTest2017 |
| 31.05.2017 | Technical article about our 6-axis force/torque sensors with ultra miniature plug connector MP11 | all-electronics.de |
| 07.05.2017 | Application note about JU-52 Dübendorf (Switzerland) | stress-analysis-13 |
| 25.04.2018 | Documentation for GSV-6 / GSV-8 WIndows DLL; Programming Manual; Examples in C++ and Labview; | gsv8-programmingmanual.pdf gsv86dll_referencemanual.pdf |
| 05.04.2017 | Documentation for GSVmulti 1.38 | Scaling,?Shortcuts,?TEDS,?Large display,?Online-Monitor,?Dig-IO-Ports,?Filters,?Analog outputs,?CANbus,?Data format,?Administration |
| 05.04.2017 | New version of the software GSVmulti 1.38 | GSVmulti-1-38 |
| 31.03.2017 | Comparison table for GSV-1A8USB and GSV-8 | Comparison-8-channel |
| 19.03.2017 | New data acquisition software 'DAQ2keyboard' | DAQ2keyboard |
| 02.03.2017 | new transport box for 3-axis force sensors | transport box for K3D-force sensors |
| 17.12.2016 | Online tool connection plan | connection plan |
| 16.12.2016 | videos about GSV-6 | Video about GSV-6 |
| 13.12.2016 | new videos about GSV-8 and GSVmulti | Video-GSVmulti |
| 08.12.2016 | new version GSV8term | setup-GSV8term |
| 04.12.2016 | Wiring schemes for straingages | Wiring Schemes |
| 27.11.2016 | New Version of Software GSVmulti | GSVmulti-1-37 |
| 14.11.2016 | Ultraminiatur Belt sensor, 100N, 7g, for belts up to 20mm width | Belt sensor KL20 |
| 18.09.2016 | English website published | http://www.me-systeme.de/en |
| 30.08.2016 | Product video 'commissioning K6D sensors' | product-videos |
| 18.08.2016 | Basics of CAN bus | can-bus-basics |
| 17.08.2016 | Information about the stiffness matrix | ba-k6d.pdf |
| 17.08.2016 | Technical data of K6D68 was revised. | K6D68 |
| 10.08.2016 | New sales partner in Turkey | Kontakt |
| 09.08.2016 | Application report strain gauges | Maeslant Wehr |
| 08.08.2016 | link to the software created also under products | /shop/en/software |
| 08.08.2016 | Documentation GSV-6toWAMP for the product GSV-6pi | /shop/en/elektronik/gsv-6/gsv-6pi |
| 08.08.2016 | Product video 'First commissioning for GSVmulti' | product-videos |